Schedule 40 And 80 Pvc Pipe Dimensions

6 schedule 80 fittings tee s x s x s pvc part no.

Schedule 40 and 80 pvc pipe dimensions.

Schedule 80 pvc pipe will have a smaller inside area than schedule 40 pipe because of its thicker wall. 160 psi or 100 psi. Be aware that schedule 40 pvc pipe does have a lower pressure rating therefore using schedule 40 parts on a primarily schedule 80 pipe system is not recommended. All the fittings we sell on our site are called by their nominal size.

Dimensions and maximum working pressure. In fact both schedule 40 and schedule 80 pvc pipe have the same outside diameters. Astm d 2466 socket type poly vinyl chloride pvc plastic pipe fittings sch 40. 8400 s socket spg spigot mpt male pipe thread fpt female pipe thread all dimensions are in inches.

Fitting diameters 18 20 24 as a customer option may also e constructed from sdr 26 or sdr 41 pipe dependent upon the pressure rating required i e. Pvc schedule 40 fittings will be white in color while pvc schedule 80 fittings will be dark gray in color. Schedule 40 and schedule 80 pvc pipe and fittings have identical od outer diameters and can be used interchangeably if needed. All pvc fittings shall be molded or fabricated from xirtec pvc compound compatible with the pipe material.

As a 1 sch 80 pvc pipe. Only xirtec schedule 80 pipe shall be threaded and the pressure rating shall be reduced by 50. Pvc pipe sizes are different than the size the pipe is called. Sdr 13 5 21 26 41 pvc pipe dimensions.

The difference is in the inside diameter or i d. Fittings follow this same pattern a 1 fitting has a 1 315 inch opening to accept a 1 inch pipe which actually measures 1 315 inches in diameter. Belled end pipe socket dimensions shall conform to astm d2672 or f480. That s because both types of pipe have the same outer diameter measurements.

Schedule 40 pvc dimensions. 03 04 upvc schedule 40 schedule 80 aquarius industrial pipes and fittings upvc schedule 40 schedule 80 aquarius industrial pipes and fittings astm d 1784 rigid poly vinyl chloride pvc compounds. Astm d1785 standard specification for poly vinyl chloride pvc plastic pipe schedules 40 80 and 120 is manufactured to meet the needs of a broad range of industrial commercial and residential piping systems. Astm d 1785 poly vinyl chloride pvc plastic pipes sch 40 sch 80.

Typical weight and dimensions of industrial pvc and cpvc pipes equal to steel pipes schedule 40 and 80 are indicated in the table below. A 2 pvc fitting on our site will always fit a piece of 2 nominal size pvc pipe. Pvc and cpvc technical. Both schedule 40 and schedule 80 pvc fittings will fit onto pvc pipe of either schedule.

Astm d1785 covers pipes made for water. This color code applies to both pressure and drainage patterns. So a 1 size sch 40 pvc pipe has the same o d.